House Power Wash: 6 Essential Power Washing Tips to Make Your House Shine Like New
If you’re looking to spruce up the exterior of your house but don’t know where to begin, house power washing may be the perfect solution. Not only is it relatively straightforward and cost-effective, but it can also yield spectacular results in just a few hours — making your house gleam like new! But before you get started with this process there are some essential tips you should know about power washing to ensure that you get the best possible outcome. In this blog post, we’ll cover six great tips for creating an impeccable finish on your home’s exterior surfaces through power washing. Keep reading if you want to give your home an eye-catching shine!
Prepare the area before power washing by removing any furniture, plants, and decorations
If you’re planning on power washing your house it’s important to prepare the area properly beforehand. One of the key steps in this process is removing any furniture, plants, and decorations from the area. Not only will these items get in the way of the power washing process and potentially obstruct your view of what you’re doing, but they can also get damaged or ruined by the high-pressure water. By taking the time to clear the space and create a safe, open area for power washing, you’ll ensure that you get the best possible results from your efforts. So roll up your sleeves, grab some gloves, and get ready to transform your outdoor spaces!
Use the correct pressure setting for the job (the higher the pressure, the more cleaning power)
When you’re power washing, it’s important to use the correct pressure setting for the job. This is because the higher the pressure, the more cleaning power is generated — allowing you to remove even stubborn dirt and grime from your home’s exterior surfaces. But be careful not to use too much pressure as this can end up causing damage to your house instead of cleaning it. A good rule of thumb is to start out with a low pressure and gradually increase as needed — that way you’ll ensure that your home’s exterior surfaces are protected from accidental damage while still getting the job done properly.
Start at the top of your house and work your way down to prevent streaking
When it comes to power washing services, streaking can be a major issue. One great tip to prevent streaks is to start at the top of your house and work your way down. This allows any dirt, debris, or cleaning solution to flow naturally down the siding instead of sitting on it and potentially leaving streaks. Plus, starting at the top ensures that you won’t accidentally dirty up areas you’ve already washed clean. With this simple technique, you can power wash your home with confidence, knowing that each pass is efficient and streak-free.
Avoid getting too close to windows and doors to avoid damaging them
When it comes to power washing your house, you should avoid getting too close to windows and doors. This is because the high-pressure water can cause damage to them if you’re not careful. Instead, try to keep a good distance between yourself and these areas — about 2 feet is usually enough — so that the pressure is diffused and no damage is done. This same rule applies to any other areas of your house that could be damaged by the water pressure, such as window screens and siding seals. Keeping this in mind will help you get great results without putting your home at risk!
Clean from side-to-side instead of up-and-down to ensure even coverage
When power washing, it’s important to clean from side-to-side instead of up-and-down. This ensures that the water has enough time to penetrate deep into the surface and remove any dirt and grime on its way down. Moving in a side-to-side motion also helps you generate an even coverage across your siding or other exterior surfaces, making them look uniform and clean. Remember to overlap each pass by a few inches to ensure that no spots are missed — this will help you maximize the efficiency of your cleaning efforts and achieve a spotless finish on your house!
Rinse with water after washing to remove any chemical residue
Once you’ve finished power washing your house it’s important to rinse with water afterwards. This will help remove any chemical residue that may have been left behind and ensure that the exterior of your home is completely free of dirt and grime. It’s also a good idea to use a garden hose with a spray nozzle for this task — that way you’ll be able to control the pressure and avoid damaging any of your home’s surfaces. With a thorough rinse, you can be sure that your house will look spotless and ready to show off to the world!
American Services AR
(501) 932-8681
